BISOL EasyMount ALU Twin Base 100
Cost effective lightweight solution for hassle-free installations
This lightweight, but sturdy mounting solution requires no roof penetration and is suitable for flat roofs covered with bitumen, gravel or synthetic membrane. The ALU base is delivered completely pre-assembled to simplify the installation work, as well as substantially reduce the installation time. Different solutions allow various module incline angles and are available as a south facing or east-west facing option.
Download technical specification
Application | Flat roofs | |||||
Roof incline angle | Up to 5° | |||||
Method of installation | Direct laying without roof penetration | |||||
Module incline | 10° | |||||
Module orientation | Landscape | |||||
Module frame tolerances | Width: 991 mm (39.02”) / Reverse side width of the frame: 27 – 32 mm (1.06” – 1.26”) / Frame thickness: 35, 40 or 45 mm (1.38”, 1.57” or 1.77”) applicable to different clamp types | |||||
Material | Aluminum EN-AW 6060 T5 (L-profile) / Stainless steel A2-70 (fastening elements) | |||||
System weight without ballast | 0.01 kN/m2 (without PV module) | |||||
Snow load per system | 0 – 2.40 kN/m2 (with BISOL PV modules) | |||||
Wind load (velocity) | 0 – 115 km/h (71 mph) | |||||
Additional stabilization | Ballast |
The extension of L-profiles can be achieved using the L-connectors.
PV modules are placed on the connectors and fixed into the pre-inserted nuts with middle or end clamps.
Additional ballast (concrete slabs) can be placed into specially prepared ballast pans fixed to the structure.
Product name | Module incline (°) | Distance from point A to B(1) |
BISOL EasyMount ALU Twin Base 100 | 10° | 240 cm (7’ 11”) |
(1)Layout example for optimal yield-to-installed power ratio in Central Europe. Adjustable upon request.