BISOL EasyMount Roof hook 8-30
Landscape orientation without use of grid
Levelling out uneven roof surfaces
Suitable for regions with heavy snow load
Double-adjustable solution for various types of tiled roofs, especially suitable for regions with heavy snow load
BISOL EasyMount Hook is a perfect solution for pitched roofs covered by any type of tile with the exception of barrel tiles. The double adjustability of the hook permits use on roofs with large wave tiles, enables levelling out the uneven roof surfaces and provides more efficient cooling of the modules by lifting them further away from the foof surface. The system allows for portrait or landscape module orientation by mounting the profiles horizontally or vertically without the use of the grid. Fully pre-assembled and ready for immediate use.
Download technical specification
Application | Any type of tiled roof (except for barrel tiles) | |||||
Roof incline angle | From 10° | |||||
Method of installation | Attached to rafters | |||||
Module orientation | Portrait or landscape | |||||
Module frame tolerances | Suitable for most framed module dimensions | |||||
Maximum load on hook1 | BISOL EasyMount hook 8-30: 200 kg (441 lbs) | |||||
Material | Stainless steel 1.4301 (hook) / Stainless steel A2-70 (fastening elements) /Aluminum EN-AW 6060 T5 (profiles 50) | |||||
Snow load per system | 0 – 5.40 kN/m2 (with BISOL PV modules) | |||||
Height adjustability | 162 – 194 mm (6.36”-7.64”) from the rafter |
BISOL Hook is fixed to a rafter using four wood screws with EPDM washers. For portrait module orientation Profile 50 is mounted horizontally on the Hook.
For portrait module orientation Profile 50 is mounted horizontally on the Hook.
U-connectors allow for the extension of Profiles 50.
Pre-assembled end and middle clamps are mounted on Profiles 50.
For larger spans and landscape module orientation a grid is laid out by connecting two intersecting Profiles 50 with the L-connector.
Distance | |||||||
A | 40 cm (15.75”) | ||||||
B | 80 – 150 cm (31.50”-59.06”) |
Spans between rafters | |||||||||
C | Any | 85 cm ± 6.5 cm (33.5˝ ± 2.6˝) | |||||||
Module orientation | Landscape | Portrait | Landscape | ||||||
Solution | Profile 50(1) / Grid (Profile 50 + Profile 50) | Profile 50 | Profile 50 + L-connector |
(1) For modules that can be mounted on the short frame side.