LUXOR Eco Smart Line 60/230-250W
The 60-cell module Eco Smart Line like every Luxor Solar module has high-quality solar cells with an efficiency up to 17,7 % at the best possible low light behaviour to ensure the best energy output. Using intelligent electronics from Tigo Energy® that is integrated into the junction box, the Eco Smart Line modules have a better overall system yield, provide greater flexibility in system design, more safety and better transparency in system monitoring. Mismatch losses that occur due to different roof inclinations or partial shading can be avoided thanks to the Maximum Power Point Tracking (MPPT). The smart electronics in the junction box ensures that each module delivers its maximum performance. Since the PV system has lesser BOS components, thanks to Eco Smart Line, the installation is quicker, easier and cheaper.
LUXOR Eco Smart Line 60/230-250W
LUXOR Eco Smart Line 60/230-250W
60 cells, poly (6″)
High-quality solar cells with an efficiency up to 17.7 % at the best possible low light behaviour to ensure the best energy output
Integrated Tygo Energy optimizer in the junction box
Modules with different wattages can be used in the same string
Electrical data | LX-230P | LX-235P | LX-240P | LX-245P | LX-250P |
Rated power Pmpp [Wp] | 230.00 | 235.00 | 240.00 | 245.00 | 250.00 |
Pmpp range from | 231.50 | 236.50 | 241.50 | 246.50 | 251.50 |
Pmpp range to | 236.49 | 241.49 | 246.49 | 251.49 | 256.49 |
Rated current Impp [A] | 7.73 | 7.84 | 7.95 | 8.06 | 8.16 |
Rated voltage Vmpp [V] | 29.95 | 30.17 | 30.38 | 30.59 | 30.83 |
Short-circuit current Isc [A] | 8.22 | 8.39 | 8.49 | 8.58 | 8.61 |
Open-circuit voltage Uoc [V] | 32.70 | 32.70 | 32.70 | 32.70 | 32.70 |
Efficiency at STC | 14.23 % | 14.54 % | 14.85 % | 15.16 % | 15.46 % |
Efficiency at 200 W/m2 | 13.67 % | 13.97 % | 14.30 % | 14.62 % | 14.93 % |
NOCT [°C] | 47 ± 2°C | 47±2°C | 47±2°C | 47 ± 2°C | 47 ± 2°C |
Specification as per STC (Standard test conditions): irradiance 1000 W/m2 | module temperature 25°C | AM = 1,5 NOCT (nominal operating cell temperature): irradiance 800 W/m2 | wind speed 1 m/sec | temperature 20°C | AM = 1,5 | |||||
Limiting values | LX-230P / LX-235P / LX-240P / LX-245P / LX-250P | ||||
Max. system voltage [V] | 1000 V | ||||
Max. return current [I] | 15 A | ||||
Temperature range | – 40 to 85°C | ||||
Snow-load zone1 | approval up to SLZ 3 (according to DIN 1055) | ||||
Max. pressure load (static) | 5400 Pa |
Mechanical data | ||
Temperature coefficient | LX-230P / LX-235P / LX-240P / LX-245P / LX-250P | |
Pmpp range from | 0.00 % /°C | 0.05 % /°C | – 0.45 % /°C | |
Number of cells (matrix) | 6 x 10, three strings connected in series | |
Cell size | 156 mm x 156 mm | |
Module dimensions (L x W x H)2 | Weight | 1,640mm x 992mm x 40mm | 18.0kg | |
Front-side glass | 3.2 mm hardened solar glass with low iron content | |
Frame | stable, anodised aluminium frame in a hollow-section design | |
Socket | Tigo, MMJ-ES50 | |
Diodes | 4 Schottky diodes 30A/100V | |
Cable | 4 mm2 solar cable, cable length 1.1 m | |
Plug-in connection | high-quality plug-in system, (IP65) MC4 | |
Hail test (max. hailstorm) | ∅ 45 mm | impact velocity 23 m/s | |
General technical approval | classified according to DIN EN 13501-5 as BROOF(ti) | |
Packing | LX-230P / LX-235P / LX-240P / LX-245P / LX-250P | |
Packing unit | 25 modules, 2 Impp classes | 28 PU/40′ container | |
Dimensions (L x W x H) | Weight | 174cm x 114cm x 121cm | 490kg gross | |
The specifications and average values can vary slightly. Decisive is the corresponding data of the individual measurement. Specifications are subject to change without notice. Measurement tolerance: rated power +/- 3 %, other values +/- 10 %, all information in this data sheet corresponds to DIN 50380, other information to be found in the installation guidelines.1 For standing installation
2 Tolerance L/W = +/- 3 mm, H = the dimensions given in the order confirmation will be decisive 3 Location on request |